Initial Setup
Creating new wallet on the Biometric Wallet
Last updated
Creating new wallet on the Biometric Wallet
Last updated
D'CENT Biometric Wallet is equipped with 4-buttons for navigation.
Up(∧)/Down(∨) buttons : move between selectable items or change value of numbers or characters.
OK button : confirm selected item or input value.
Back button : move to previous menu or cancel the current input value.
To power on the device, press and hold the power button for 3 seconds, which is located on the right-side.
If the cold wallet does not power on, please charge its battery using the USB cable included in the package box, and then turn it on.
Use ∧(Up) or ∨(Down) button to select your language and press OK button.
Language support : English, Korean, Chinese, Japanese, Spanish
After setting up your cold wallet, you can change the Language from the Setting menu.
To create a new wallet, select "Create Wallet" from the menu.
Selecting "Create Wallet" will create a wallet from a new private key. If you wish to recover an existing wallet, please refer here.
To protect accessing your wallet, register a new PIN and your fingerprint. Firmware below v.2.5.5 only supports 4-digit PIN length.
Use ∧(Up, increase number value) or ∨(Down, decrease number value) button to input your PIN. Pressing the OK button on the hardware wallet will confirm the input.
When you have entered 4 digits, you will see "OK" text on the screen. If you wish to set your PIN to 4-digits long, then press the OK button on the hardware wallet.
If you wish to set the PIN to a longer digit, you can change the ("OK" text) value on the screen by pressing the Up or Down button. Your PIN can be set to 4, 5, 6, 7, or 8 digits long.
If you register a 4-digit PIN, you will see a “Security level is low” warning on the screen. If you wish to use such a PIN, press the "OK" button on the hardware wallet to continue.
Re-enter the same PIN you have set in the previous step to verify for correctness.
※ If the PIN numbers do not match, you will have to restart the PIN registration.
After setting up your cold wallet, you can change the PIN value from the Biometric Wallet Setting menu.
1) To register your fingerprint, touch your finger on the sensor to scan.
Fingerprint sensor is located in the middle of where the navigational buttons are located. Check the location of fingerprint sensor.
2) Slightly change the angular positioning of the same finger when scanning and repeat until 100% (8 correct scans) is reached.
Scan your fingerprint one last time to verify registered fingerprint.
※ If the fingerprint does not match, you will have to restart the Fingerprint registration. .
※ If re-registering fingerprint, try using a different finger instead.
※ If unable to register your fingerprint for any reason, you will be given an option to skip the fingerprint registration. Fingerprint can be registered from the Setting menu at a later time.
※ If fingerprint verification fails, your fingerprint will not be saved.
Recovery seeds are the codes that you use to recover your wallet.
If your D'CENT Cold Wallet is ever lost, stolen, damage, or wiped and you no longer have any access to your wallet, using recovery seeds is the only method of recovering your existing wallet.
You MUST write down all the recovery seeds on the Recovery Card and keep it secured in a safe place.
Recovery seeds required for recovering your existing wallet is shown only once during initial setup. If you lose your recovery card, there is nothing we can do to help you recover your funds. You are solely responsible to secure your recovery card in all events.
If you lose your recovery card, there is no other way to recover your existing wallet and your funds will be lost.
1) Press OK button only when you have fully understood the WARNING notice.
2) Write down all the recovery seeds (words) shown on the screen of your cold wallet. Press OK button to see the next list of words.
There are 6 lists with total of 24 words and each list has 4 words shown. Make sure you write them down correctly and in the exact same order as shown.
When writing down the recovery words, make sure to check that the spelling is correct
3) When you have written down all 24 words, press OK button to continue.
Do not take pictures or save images of your recovery words or recovery cards. You are responsible for securely handling your recovery words. D'CENT is not liable for any damage or loss of crypto assets resulting from user negligence, such as the theft of recovery cards or the storage of image files.
Special care must be taken to ensure safe storage (away from fire, water, sunlight or pets).
Enter all 24 words written on the recovery card to proceed with verification.
※ How to input : Use the Up/Down buttons - ∧(increase value from a to z) or ∨(decrease value z to a)
For example, if the recovery word is "patch", enter the first character "p" and press the "OK" button > enter the second character "a" and press the "OK" button > enter the third character "t" and press the "OK" button.
From the list of words available, select the correct word(patch) using ∧/∨ buttons and press "OK" to choose as the answer.
※ If you find yourself having written down the words incorrectly, you can press "OK" button(RETRY) to re-enter the recovery seeds from the lists for review.
Complete your review by entering all 24 words this way.
Congratulation, you have passed the quiz and your new wallet is created. From your cold wallet, you can check the lists of coin accounts available. You are now ready to use your new wallet together with the mobile application.
You can find the complete list of cryptocurrency assets supported on D'CENT Biometric Wallet from https://www.dcentwallet.com/en/supportedcoin
Once you have completed the Initial Setup, make sure to visit D'CENT Wallet homepage and check for the latest firmware available. Newer version of firmware may include additional support for cryptocurrency assets and new wallet features.
More information on firmware update can be found from here.
