Connect with iOS phone

Mobile App Download

Click to install D'CENT mobile app.

Install by searching from the App store

You can also search from the App store to install D'CENT mobile app.

Search for "D'CENT wallet" from the App store.

Basic setup for Mobile App

Select wallet mode

If you are launching the mobile app for the first time, you will need to go through the initial setup and select a wallet mode. When the app launches, select “Biometric Wallet” as shown below.

You can change the wallet mode at any time from the Settings tab in the mobile app. If you are using a biometric cold wallet, make sure to set the wallet mode to "Biometric" in the mobile app. For instructions on how to change the wallet mode, refer to this guide.

Register password for Mobile App

Register mobile app password for access protection. To set the password, enter the same 6-digit number twice. Mobile App password is required every time you run the D'CENT mobile app. Make sure to remember it.

Mobile App password can be changed from the App "Setting" menu at any time. Instead of password, you can also use biometric authentication to protect access to your wallet if your mobile phone supports the feature.

Mobile App Permission Settings

A permission request popup will appear when you launch the D’CENT mobile app. Review the permissions being requested, then click “Confirm” button to proceed.

Next, click the “Allow” button for both the Notification and Find Bluetooth Devices permissions to continue.

Bluetooth connection with Biometric Wallet

To use the cold wallet with the mobile app, Bluetooth pairing is required.

Step 1 : Checking the Cold Wallet Device ID

You can check the device ID of your cold wallet using the following steps.

1) Turn on the cold wallet, authenticate using your fingerprint or PIN, then navigate to the "Settings" menu and press "OK" button.

2) Select the "Bluetooth" menu and press "OK" button.

3) Choose "iOS" menu and press "OK" button.

4) On the cold wallet screen, the message "Connecting..." will be displayed along with the Device ID. The D'CENT Device ID is displayed in the format D'CENT-iD-<numbers or letters>.

Once the cold wallet enters pairing mode, you can connect it to your phone via Bluetooth.

Step 2 : Connecting with the D'CENT mobile app

1) Open the D'CENT mobile app and select "Bluetooth icon" at the top of the "My Wallet" tab.

2) A "Search Device" popup will appear, displaying the device name that matches the Device ID(D'CENT-iD-<numbers or letters>) shown on your cold wallet screen.

3) When your D'CENT device is selected, your wallet will start the synchronization automatically. Synchronization will take few seconds to complete.

4) When synchronization is complete a connection indicator will appear in the top of the mobile app.

Now, you can tap the "Add Account" button to add the necessary coin accounts. For detailed instructions on adding coin accounts, click here.

Last updated

Was this helpful?