This is a guide to creating a copy of your original card wallet to a D'CENT Backup card.
D'CENT Backup Card is a hardware wallet with no data inside the security chip, which can be used to make a backup copy of your original card type wallet through secure encryption technology. This means that the data from your original card wallet is encrypted with the user's password and can be transferred to the Backup Card to create an exact same copy of your existing wallet.
Continue to the next sections to find out how you can create a backup image and how it can be recovered on a Backup Card.
Before you begin, make sure you have changed the initial PIN on your Backup Card. Your initial PIN is found by scratching off the masking on the card surface.
You can change the initial PIN by selecting 'Change card PIN' from the Manager tab.
In order to use the Backup Card, the initial PIN must be changed first. If you have not done so already, please follow the guideline below to change the initial PIN.
Step 1) Go to the Manager tab and select 'Change card PIN'.
Step 2) Press 'Start' to begin.
Step 3) Find the initial PIN by removing masking on the surface of the card. Enter the 6-digit initial PIN.
Step 4) Tag your Backup Card wallet.
Step 5) Enter a new PIN to set to your Backup Card wallet.
Step 6) Re-enter the same PIN from Step 5 above.
Step 7) Tag your Backup Card wallet.
Step 8) Press 'OK' to finish the PIN setup.
To recover a backup image, please have your Backup Card ready. Follow the steps carefully as described in the instructions.
Step 1) Go to the Manager tab and select 'Backup and Recover Card'.
Step 2) Select 'Recover backup image'.
Step 3) Press 'Start' to begin.
Step 4) Tag your Backup Card.
Step 5) If the Backup Card is usable for recovery, you will see this screen. Press 'Next' and continue the setup from Step 7.
Step 6) If the Backup Card is detected as 'Unrecoverable card' after tagging from Step 4, you will need to change the initial PIN on the Backup Card first.
Step 7) Paste the encrypted backup image data that you have created. Press 'Next' to continue.
Step 8) Enter the password you have set to the backup image. Press 'Next' to continue.
Step 9) Enter the PIN of your Backup Card wallet.
Step 10) Tag your Backup Card.
Step 11) Press 'Finish' to complete the process.
Make sure to double-check that the Backup Card has been recovered normally.
You can check if the Backup Card is working properly by using 'Scan new card' function from the Manager tab.
To create a backup image, please have your ORIGINAL card wallet ready. Follow the steps carefully as described in the instructions.
Step 1) Go to the Manager tab and select 'Backup and Recover Card'.
Step 2) Select 'Create backup image'.
Step 3) Press 'Start' to begin.
Step 4) Tag your ORIGINAL card wallet.
Step 5) Press 'Next' to continue.
Step 6) Enter a password for encrypting the backup image data. Re-enter the same password and press 'Next' to continue.
Step 7) Enter the ORIGINAL card PIN.
Step 8) Tag your ORIGINAL card wallet.
Step 9) Press 'Share backup image' to send the encrypted data (backup image) in a message to yourself. Press 'Finish' to complete the process of creating an encrypted backup image.
If you don't have a Backup Card, you will want to save this encrypted data in a safe place or send it to yourself in a message. You can recover this backup image onto a Backup Card at a later time.
Make sure to remember the password you have set to encrypt the backup image. If you forget the password, you will not be able to recover your wallet.
