Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
The public address of Bitcoin stems from the wallet's xPub (Extended Public Key), this means that a new public address can be derived from it. Once your Bitcoin public address receives an incoming payment, a new address will automatically be generated.
When your BTC account is created on D'CENT Wallet, it will automatically generate 15 public addresses that you can use. To see the full list of BTC public addresses, run the mobile app and do the following:
1) Press the "Receive" button on your Bitcoin account. 2) On the next screen press the down arrow ( ∨ ) under the current BTC address.
In the last screen shot, you can see a list of your public addresses. The current BTC address is highlighted in "mint" color.
How to send and receive each coin
1) From mobile app, press the “Send” button of the Ripple (XRP) account to be used for the transaction.
2) Enter the wallet address of the other party (recipient) and enter the Destination Tag if you are sending XRP to an address that is created by an Exchange.
When sending XRP to an address that exists on the Exchange, you MUST enter the Destination Tag to complete normal deposit into the recipient's account.
If you send XRP WITHOUT entering the Destination Tag to an address that exists on the Exchange, the deposit amount may be lost forever.
A Destination Tag is not required if you send XRP to a personal wallet such as D'CENT Wallet. However, if the other party (recipient) provides you with a Destination Tag, you must enter it.
Send and Receive RSK (RBTC) coin
If you don't have RSK account, create new account. Coin name for RSK is "RSK Smart Bitcoin(RBTC)".
For more details of creating an account, click below link.
From your coin account, click "Receive" to view your account address.
For more details of receiving coin, click below link.
The procedures to send RSK coin are same as sending general coin. You can see in the below link to check how to send coin.
The fee of RSK is automatically calculated after setting the sending amount. The calculated fee is based on current average transaction fee on RSK blockchain network.
You can change the fee by sliding the bar or by directly entering the fee value in the advanced fee mode.
If the fee is set too low, the transaction may not get confirmed in the blockchain network.
If you have added your Ripple (XRP) wallet address for the first time, it is disabled. Ripple's policy requires a purchase or transfer of Ripple of 20 XRP or higher to convert the Ripple wallet address to an activated state. Therefore, the corresponding 20 XRP will permanently lock-up at the corresponding wallet address. If a permanent lockup is made at the address of the Ripple wallet, it is assumed that only 980 XRP can be transferred, excluding the 20 XRP, which is the permanent lockup amount.
Users' ripple wallets assigned by the Exchanges use the same address. In other words, User # 1, User # 2, User # 3, all use the same ripple address. To distinguish a user's account from another user, the Exchange will assign a Destination Tag to the user's account, which is an uniquely identifiable number. Therefore, when sending XRP to a recipient wallet address created from the Exchange, you MUST enter the Destination Tag so that the Exchange will complete the deposit to the recipient's wallet account.
Picture above is an example of XRP wallet account created from an Exchange such as Binance. When you press "Deposit" for XRP, it will show the XRP deposit Tag (9-digit unique number). On the bottom, the XRP address is shown.
When sending funds to the Ripple wallet address that exists on the Exchange, you must enter the Destination Tag.
In the case of a XRP wallet created on a personal wallet such as D'CENT Wallet, there is no destination tag and only the address is created.
Personal wallet such as D'CENT Wallet does not have a Destination Tag for its XRP account.
Send and Receive Ethereum (ETH) coin
If you don't have Ethereum account, create new account. Coin name for Ethereum is "Ethereum (ETH)".
For more details of creating an account, click below link.
From your coin account, click "Receive" to view your account address.
For more details of receiving coin, click below link.
The procedures to send ETH coin are same as sending general coin. You can see in the below link to check how to send coin.
The fee of Ethereum is automatically calculated after setting the sending amount. The calculated fee is based on current average transaction fee on Ethereum blockchain network.
You can change the fee by sliding the bar or by directly entering the fee value in the advanced fee mode.
If the fee is set too low, the transaction may not get confirmed in the blockchain network.
The fee of ethereum is consist of "GAS fee" and "GAS Limit". The unit of GAS fee is "gwei" which is one of ETH's sub unit.
1 ETH = 1,000,000,000 gwei
The real fee to be paid is calculated as “Used GAS amount” x “GAS fee”
.
You can set the maximum amount of GAS as setting GAS Limit. Transaction can be confirmed faster if GAS fee is higher. You can manually set the GAS Limit and GAS fee on "Advanced" fee setting option.
Send and Receive Klaytn (KLAY) coin
If you don't have Klaytn account, create new account. Coin name for KLAY is "Klaytn (KLAY)".
For more details of creating an account, click below link.
From your coin account, click "Receive" to view your account address.
For more details of receiving coin, click below link.
The procedures to send KLAY coin are same as sending general coin. You can see in the below link to check how to send coin.
The fee of Klaytn is consist of GAS fee and GAS limit. The unit of GAS fee is "ston" which is one of KLAY's sub unit.
1 KLAY = 1,000,000,000 ston
The real fee to be paid is calculated as "Used GAS amount" x "GAS fee"
.
GAS fee is fixed on Klaytn, and you can change GAS Limit on fee setting stage.
GAS Limit is automatically calculated in D'CENT mobile application.
D'CENT Wallet supports Binance Smart Chain (BSC) and BEP20 tokens The firmware (v.2.6.0 or higher) for D’CENT Biometric Wallet supports Binance Smart Chain and the BEP20 protocol. Additionally, the D’CENT Mobile App (v.5.1.0 or higher) will also support Binance Smart Chain and BEP20 tokens.
Binance Smart Chain is an innovative solution to bring programmability and interoperability to Binance Chain. It relies on a system of 21 validators with Proof of Staked Authority (PoSA) consensus that can support short block time and lower fees. The Binance Smart Chain also supports EVM-compatible smart contracts and offers interoperability for Cross-chain transfer.
You can download the latest version of the D’CENT Mobile App here: 👉 For Android 👉 For iOS
If you are using an older version of the firmware on D’CENT Biometric Wallet, you will need to upgrade the firmware to the latest version (v.2.6.0 or higher) from the official firmware update site. 👉 Official Firmware Update Site
You can also find a fully detailed instructions guide below. 👉 Firmware update user guide
Run the D’CENT Mobile App and authenticate to unlock access.
Step 1) From the Account Tab, press the (+) button to add a wallet account. Step 2) In the search field, type “Binance” to search. Step 3) Choose Binance Smart Chain from the list shown.
Step 4) Press the ‘Create’ button to proceed. Step 5) In the Account Tab, notice that a new Binance Smart Chain account has been added to the portfolio.
You can access Dapp services using the built-in dapp browser found in the ‘Discovery’ Tab.
Step 1) Go to the ‘Discovery’ tab in the bottom menu. Step 2) Click on the Network icon(globe icon) located in the upper right-hand corner. Step 3) Switch the network to ‘Binance Smart Chain’. Step 4) You can access a dapp service by entering the URL in the search field.
👉 https://dappradar.com/rankings/protocol/binance-smart-chain
Send and Receive Binance (BNB) coin
If you don't have Binance account, create new account. Coin name for Binance is "Binance chain(BNB)".
For more details of creating an account, click below link.
From your coin account, click "Receive" to view your account address.
For more details of receiving coin, click below link.
The procedures to send BNB coin are same as sending general coin. You can see in the below link to check how to send coin.
The fee of BNB is fixed as "0.000375 BNB" per transaction.
Send and Receive Monacoin (MONA)
If you don't have Monacoin account, create a new account. Coin name for Monacoin is "Monacoin (MONA)".
For more details of creating an account, click below link.
From your coin account, click "Receive" to view your account address.
The account of Monacoin supports HD wallet. "HD wallet" is the technical standard suggested in BIP-44 from bitcoin improvement proposal. A monacoin account of D'CENT wallet manage 15 addresses. Any address in the account can be used to receive coin.
Click "v" to see all of the addresses list and choose the address you want to use.
For more information about receiving coin, click below link.
The procedures to send monacoin are same as sending general coin. You can see in the below link to check how to send coin.
The fee of Monacoin is automatically calculated after setting the sending amount. The calculated fee is based on current average transaction fee on Monacoin blockchain network.
You can change the fee by sliding the bar or by directly entering the fee value in the advanced fee mode.
If the fee is set too low, the transaction may not get confirmed in the blockchain network.
Stellar (XLM) coin is supported on the hardware wallet installed with firmware version v2.1.0 or higher. Please refer to the link below for instructions on how to update the firmware.
If you don't have a Stellar Lumen account, create a new account. The coin name for Stellar Lumen is "Stellar (XLM)".
For more details on how to create an account, click the link below.
There is a case where the Stellar account cannot be created even though the current firmware version is v2.1.0 or higher. This is because the new algorithm used by Stellar cannot be used if the firmware version installed in the product was lower than v2.0.1 when it was originally purchased.
In the event when trying to create a Stellar account from the mobile app, the search result will not display Stellar coin as an account that can be added. See the picture below.
You can create a Stellar wallet account after recovering the wallet using the recovery words. But first, you must perform the device wipe from the settings menu of the hardware wallet.
1) Click here for instructions on how to initialize(device wipe) the hardware wallet.
2) Click here for instructions on how to recover your wallet.
Warning! You MUST not reset(device wipe) your device if you do not have your recovery words!
After adding a Stellar (XLM) wallet from your mobile app, it will be in the disabled (not created on the Stellar network) state. Due to Stellar's policy, a minimum of 1XLM must be transferred to the Stellar address to activate the account on the Stellar network. Depending on the exchange services, transferring fund to an inactive XLM account address may be restricted. In addition, 1XLM in the account will be permanently locked-up. For example, if you have 100XLM in your account after creating your wallet, you can only transfer 99XLM (including fee). As shown in the figure, the remaining balance of 1XLM cannot be sent to another account even when if you try to send the maximum amount.
In some cases, the lock-up amount may be different. See the link below for more details. https://www.stellar.org/developers/guides/concepts/fees.html#minimum-account-balance
Currently, D'CENT Wallet is running an event to support the cost of activating the XLM account that is created. Please refer to the section below "Receive Stellar coin".
The Stellar wallet used by an exchange service uses a single address. In other words, all users of the exchange have the same address. To distinguish each user's account, the exchange service manages the user accounts by assigning a unique identification character (Memo) to each user.
Therefore, when sending XLM to a recipient wallet address created from the Exchange, you MUST enter the Memo so that the Exchange will complete the deposit to the recipient's wallet account.
From your XLM account, click "Receive" to view your account address.
If your XLM account is inactive, please activate your account by clicking on the (Event) link.
If you are sending Stellar coins to your exchange account, you MUST enter the Memo.
If you are sending Stellar coins to a personal wallet such as D'CENT Wallet, entering Memo is optional. You can enter any notes in the Memo field or choose to change the Memo options.
When sending money, check the address and memo once again before making the final confirmation.