Troubleshooting Guide

My D’CENT wallet was disconnected while the firmware was being updated. The device is stuck on a screen and it won’t turn off. What should I do?

First, disconnect your D’CENT wallet from your PC.

Press and hold both the "Down button" + "Power button" for few seconds to force the device to power off. If your device is "brick"ed during the firmware update, you can still access the bootloader mode by pressing and holding both "OK button" + "Power button" for 10 seconds.

From the bootloader mode, you can try updating the firmware to recover your Biometric Wallet.

From the D'CENT firmware update webpage, I pressed "Update Firmware" button, but I get the following message; "Your D'CENT is disconnected. Firmware Update process is cancelled". What should I do?

In rare cases, Windows system fails to recognize the D’CENT wallet even though it was recognized before. This issue can be solved by uninstalling the device driver and reinstalling it again from the Windows Device Manager.

How to access Device Manager (method #1)

Press Windows+R on your keyboard.

Type in "control panel" and press Enter to access the Control Panel.

  • For Windows 10 or Windows 8, choose Hardware and Sound.

  • For Windows 7, choose System and Security.

From this Control Panel screen, look for and choose Device Manager.

  • For Windows 10 or Windows 8, check under the Devices and Printers.

  • For Windows 7, check under System.

How to quickly access Device Manager (method #2)

Press Windows+R on your keyboard.

Type in "cmd" and press Enter to run the Command Prompt (a black window).

Type in "devmgmt.msc" and press Enter.

What should I do from the Device Manager?

From the Device Manager screen, look for Human Interface Devices.

Check if there is a USB Input Device marked as error (yellow triangle with exclamation mark). You will need to check if this is indeed a D'CENT device.

Right Mouse Click on this device and select Properties.

  • From the USB Input Device Properties window, select Details.

  • Under Property, choose Hardware Ids.

  • Correct device ID for D'CENT is PID_2130.

From the Device Manager, Right Mouse Click on the error marked device and select Uninstall device. On the top menu of Device Manager, press Action then select Scan for hardware changes. This will scan for any new devices attached and will automatically install the driver to detect your Biometric Wallet.